机载有源相控阵（AESA）雷达系统的现状与未来趋势

AESA技术已达到了成熟的技术阶段，正被先进的雷达项目所采用。T／R模块是使之实现的关键技术，降低其成本的工作也正在进行。在未来应用方面，已经考虑了氮化镓（GaN）、微机电射频（MEMsRF）开关和瓦式T／R模块，它们将为共形和多功能AESA雷达系统铺平道路。     

Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform

Stewart platform (SP) is a promising choice for large component alignment, and interac-tive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation (P&O) adjusting platform, based on an SP for force/torque-driven (F/T-driven) alignment, can dynamically measure interactive forces. This paper presents an analytical algorithm of measuring six-dimensional F/T based on the screw theory for accurate determination of external forces during alignment. Dynamic gravity deviations were taken into con-sideration and a compensation model was developed. The P&O number was optimized as well. Given the specific appearance of repeated six-dimensional F/T measurements, an approximate cone shape was used for spatial precision analysis. The magnitudes and directions of measured F/Ts can be evaluated by a set of standards, in terms of accuracy and repeatability. Experiments were also performed using a known applied load, and the proposed analytical algorithm was able to accu-rately predict the F/T. A comparison between precision analysis experiments with or without assem-bly fixtures was performed. Experimental results show that the measurement accuracy varies under different P&O sets and higher loads lead to poorer accuracy of dynamic gravity compensation. In addition, the preferable operation range has been discussed for high-precision assemblies with smal-ler deviations.     

深空干涉测量天线G/T值指标设计

G/T是天线的一项重要技术指标,在综合考虑测地VLBI(Very Long Baseline Interferometry,甚长基线干涉测量)和航天器VLBI观测两者需求的基础上,提出了深空干涉测量天线的G/T指标设计方法.首先根据射电源的空间分布以及流量密度特性,确定了测地VLBI和航天器VLBI观测模式下射电源流量密度的要求.在此基础上建立了2种观测模式下时延误差与深空干涉测量天线G/T之间的关系模型.最后参考目前国际国内测地VLBI观测中的通用参数设置以及月球探测任务中航天器VLBI观测的参数设置,对不同观测任务、不同观测模式下的G/T要求进行仿真分析.综合测地VLBI和航天器VLBI观测仿真分析的结果,S频段G/T建议不小于32 dB/K,X频段G/T建议不小于43 dB/K.仿真分析结果可以作为后续深空干涉测量天线G/T设计的参考.     

固体界面间接触热阻的理论分析

在M—T接触导热分形模型的基础上，考虑了各接触点的收缩热阻，对M—T模型进行了修正。在此基础上，分析了表面分形参数、界面温度及材料物性等因素与接触热导的关系，并结合实验数据对修正型M—T接触导热模型、经典Mikie模型和Yovanovich模型的预测结果进行了对比分析。     

首都机场T3航站楼钢结构应用

一、工程概况 北京首都国际机场T3航站楼是为了迎接北京2008年奥运会而进行的扩建项目，是2008年奥运会的配套项目。其规划设计、建筑方案和初步设计由NACO／Foster／Arup联合体完成，北京市建筑设计研究院与之合作完成施工图设计。图1是T3航站楼的效果图。     

平尾上反角和静升力对T尾颤振的影响

T尾颤振分析在计算非定常气动力时要计及平尾上反角和静升力等参数的影响。基于片条理论计算由静升力引起的附加非定常气动力，将其引入到用MSC／NASTRAN常规T尾颤振计算得到的广义气动力当中，再用PK法求解T尾颤振，从而建立T尾的颤振工程计算方法。     

复合材料T形胶接接头结构的研究现状

介绍了典型的复合材料T形胶接接头,详细说明了目前应用于复合材料T形胶接接头结构力学性能的分析手段、方法及失效准则,并介绍了国外对复合材料T形接头结构的研究现状.     

特种工艺与GB／T19001—2000

GB／T9001-2000中有关特种工艺的规定进行了细化和转化，并结合企业实际，从人、机、料、支、环等几方面对特种工艺如何贯彻GB／T19001-2000做了较全面和详细的介绍。     

T型导管冲压工艺

对特殊形状的小直径卷圆成形工艺进行了人 试验，确定了合理的展开形状，并制定出切实行的工艺方案。